SEEING BITES WHEN ICE FISHING
Tactics That Land More Fish
By: Ray Hansen
The season is on us, and for most upper Midwesterners, fishing trips between now and April mean walking out onto the frozen surface of a lake, drilling a hole, and trying to entice fish from the icy depths. People not familiar with modern ice fishing techniques often express surprise at how good the bite can be.
Despite the advancements made in gear however, it is up to the individual to pay attention while fishing, and those who watch closest, make the best catch.
Take the simple matter of knowing when a fish is biting. While a number of “bite detection” systems exist. Perhaps the most common is to attach a short strip of spring steel with an eye on it to the end of your ice rod. These attachments are sold wherever winter tackle is available.
Typically, anglers hand-hold the rod, or place it in a holder so the tip is centered over the hole in the ice. The thin sliver of steel reacts to very slight movements, and when it moves (either up or down) you probably have a fish mouthing your bait. Staring intently at the steel tip is the best way to make sure you don’t miss anything.
Wind is an enemy of anglers using spring steel “strike indicators”. It moves the steel, making it tough to tell what is going on below the ice. If nothing else, ice fishermen are innovative, and ways to block the wind (aside from sitting inside a portable shanty) abound.
One of the best solutions is to get a round plastic container like a very small bucket, a piece of thin-walled plastic pipe, or a tub that margarine or detergent might be sold in. The diameter of the piece should be at least six inches (or larger if the hole you cut is larger). If you use a container, cut out the bottom so it is now open on both ends. Also cut a narrow “U” shaped slot in one side about half-way down from the top.
The rest is simple. Place the container over the hole in the ice with the opening of the slot facing up. This forms a wind-break around the tip of your rod when it is placed into the slot. Now the spring steel strike indicator stays motionless, and you can spot bites much easier.
Copyright Ray Hansen, 2008
Showing posts with label fall pike. Show all posts
Showing posts with label fall pike. Show all posts
Wednesday, January 7, 2009
Monday, September 29, 2008
LATE FALL PIKE - PART 1
Author's note: This blog passes along some details about fishing for northern pike during the fall cold-water timeframe. Watch tomorrow for part two.
By: Ray Hansen
Anglers almost always consider pike a “bonus catch”. They seldom go out looking specifically for these freshwater predators, but big pike show up often enough that the possibility of catching one comes up frequently in conversation between anglers fishing for other species. Well… why not set up gear that appeals to the water-wolves and target them on your late-fall trips? You may be in for a real treat. In this article I’ll pass along some ideas that can help you enjoy some memorable action.
PICK WATERS WITH POTENTIAL
Pike get big when they inhabit waters with a forage base that supports growth. Examples include smelt, chubs, whitefish, suckers, small carp, and perch. Most of the time this means choosing places such as the big bays on Lake Michigan along the Wisconsin coastline, big inland lakes like Geneva or Delevan in the southern part of the state, and the large “chain-of-lakes” connected waterways in a line across the state from Eagle River to the Hayward area. Big rivers and their associated backwaters in the central part of the state are an additional source of action.
I also have a “secret” type of lake that can produce pike in the forty-inch range. These are smaller bodies of water - often 100 to 300 acres - that are loaded with undersized perch. Get in the habit of asking baitshop owners if they know of a lake where fishermen constantly complain of catching mostly “dinky” perch. That is a big clue that the lake has trophy pike potential - an opportunity many local anglers overlook. Many Upper Midwestern states have lakes like this.
Having described these waters, you’ll probably realize that when chasing pike, you will also find other species like muskies, and an occasional big walleye. Well… who is going to complain? My friend Ken Poor once landed (and released – on video) a smallmouth bass that was probably one of the largest taken in Wisconsin that year, while using these tactics.
LOOK FOR STAGING AREAS
Each body of water will have places that pike inhabit late in the year as ice-up draws closer. Examples include the mouths of inflowing rivers, deep weedlines, drop-offs near incoming creeks or rivers, logs on bottom in bays, rock piles in the same areas, the deepest extension of land points out into the lake, and artificially placed fish cribs situated at the base of sharp breaklines. In the smaller lakes I mentioned, the deepest edge of any remaining vegetation is usually best – even when the depth is as shallow as four to eight feet.
End of part one.
Copyright Ray Hansen, 2008
By: Ray Hansen
Anglers almost always consider pike a “bonus catch”. They seldom go out looking specifically for these freshwater predators, but big pike show up often enough that the possibility of catching one comes up frequently in conversation between anglers fishing for other species. Well… why not set up gear that appeals to the water-wolves and target them on your late-fall trips? You may be in for a real treat. In this article I’ll pass along some ideas that can help you enjoy some memorable action.
PICK WATERS WITH POTENTIAL
Pike get big when they inhabit waters with a forage base that supports growth. Examples include smelt, chubs, whitefish, suckers, small carp, and perch. Most of the time this means choosing places such as the big bays on Lake Michigan along the Wisconsin coastline, big inland lakes like Geneva or Delevan in the southern part of the state, and the large “chain-of-lakes” connected waterways in a line across the state from Eagle River to the Hayward area. Big rivers and their associated backwaters in the central part of the state are an additional source of action.
I also have a “secret” type of lake that can produce pike in the forty-inch range. These are smaller bodies of water - often 100 to 300 acres - that are loaded with undersized perch. Get in the habit of asking baitshop owners if they know of a lake where fishermen constantly complain of catching mostly “dinky” perch. That is a big clue that the lake has trophy pike potential - an opportunity many local anglers overlook. Many Upper Midwestern states have lakes like this.
Having described these waters, you’ll probably realize that when chasing pike, you will also find other species like muskies, and an occasional big walleye. Well… who is going to complain? My friend Ken Poor once landed (and released – on video) a smallmouth bass that was probably one of the largest taken in Wisconsin that year, while using these tactics.
LOOK FOR STAGING AREAS
Each body of water will have places that pike inhabit late in the year as ice-up draws closer. Examples include the mouths of inflowing rivers, deep weedlines, drop-offs near incoming creeks or rivers, logs on bottom in bays, rock piles in the same areas, the deepest extension of land points out into the lake, and artificially placed fish cribs situated at the base of sharp breaklines. In the smaller lakes I mentioned, the deepest edge of any remaining vegetation is usually best – even when the depth is as shallow as four to eight feet.
End of part one.
Copyright Ray Hansen, 2008
Subscribe to:
Posts (Atom)
