SEEING BITES WHEN ICE FISHING

SEEING BITES WHEN ICE FISHING
Tactics That Land More Fish
By: Ray Hansen

The season is on us, and for most upper Midwesterners, fishing trips between now and April mean walking out onto the frozen surface of a lake, drilling a hole, and trying to entice fish from the icy depths. People not familiar with modern ice fishing techniques often express surprise at how good the bite can be.

Despite the advancements made in gear however, it is up to the individual to pay attention while fishing, and those who watch closest, make the best catch.

Take the simple matter of knowing when a fish is biting. While a number of “bite detection” systems exist. Perhaps the most common is to attach a short strip of spring steel with an eye on it to the end of your ice rod. These attachments are sold wherever winter tackle is available.

Typically, anglers hand-hold the rod, or place it in a holder so the tip is centered over the hole in the ice. The thin sliver of steel reacts to very slight movements, and when it moves (either up or down) you probably have a fish mouthing your bait. Staring intently at the steel tip is the best way to make sure you don’t miss anything.

Wind is an enemy of anglers using spring steel “strike indicators”. It moves the steel, making it tough to tell what is going on below the ice. If nothing else, ice fishermen are innovative, and ways to block the wind (aside from sitting inside a portable shanty) abound.

One of the best solutions is to get a round plastic container like a very small bucket, a piece of thin-walled plastic pipe, or a tub that margarine or detergent might be sold in. The diameter of the piece should be at least six inches (or larger if the hole you cut is larger). If you use a container, cut out the bottom so it is now open on both ends. Also cut a narrow “U” shaped slot in one side about half-way down from the top.

The rest is simple. Place the container over the hole in the ice with the opening of the slot facing up. This forms a wind-break around the tip of your rod when it is placed into the slot. Now the spring steel strike indicator stays motionless, and you can spot bites much easier.
Copyright Ray Hansen, 2008